3D V9 WLTOYS 124 X CENTRAL DIFF RC CAR TRUGGY 1:12 (PREMIUM)

Description

[¯`·._.·[   V9 WLTOYS 124 X CENTRAL DIFF RC CAR TRUGGY 1:12 PREMIUM  ]·._.·´¯]

 

A beta prototype version of a chassis with integrated central differential,

 

This should further improve performance, transmission robustness, and road handling.

Retro compatible with classic WLTOYS 124.No need to reprint all.

 

There is

2 types of Motor/Diff Mount (and therefore chassis) :

– WLTOYS 104 (recommended and tested)

– HSP (not recommended for current use)

 

3 Possible Differentials :

– VRX Cobra (recommended and tested, 1mm mod)

– Rlaarlo OmniTerminator (more expensive, good quality but 0.53mm mod…)

– Rlaarlo SBK 10 (more expensive, good quality but 0.53mm mod…)

 

For more details :

https://myshopkit.fr/categorie-produit/parts/parts-rc/parts-wltoys-x-central-diff-112

 

The tutorial :

https://docs.google.com/presentation/d/1M9e1Y4eSDNYdJnah7bSyBt_wpbW5PH8s_v_gSeYQH3E/edit?usp=sharing

(same as JLB X HSP until I write it up; it shouldn’t be too complex normally because the assembly principle is the same)

 

Ultra-high performance 3D printable RC car, using standard WLTOYS parts.

 

The design is improved, and much more durable than the original.

The parts are stored in folders with logical names but it is best to read the build guide.

 

BUILD GUIDE :

 

https://docs.google.com/presentation/d/1xQednf_rth1foSpnl_zI8gsLzxE91GRotefnCwp8eBw/edit?usp=sharing

 

BUY LIST :

 

https://docs.google.com/spreadsheets/d/1J4iNh10avvneWXYOm-migMHnUZ_p9EaQutxdP1Wi0wg/edit?usp=sharing

 

BUILDING VIDEO :

 

https://www.youtube.com/watch?v=ltlX8YH-RXE

 

DRIVE TEST : 

 

https://www.youtube.com/watch?v=eYnTohvDwP8

 

PREMIUM VERSION GOT :

 

– Bumpers

– New Body Mount

– Body Lower Protection Plate

– New Wheelie Bar

– All RIMS Sizes and offsets STL kit

– Motors Transmission Cover PLA

– FPV Protection

– More adjustment holes

– Fresh Update and Upgrade

– Thanks from the Creator

 

PREMIUM LINKS :

 

Official website :

 

https://myshopkit.fr/

 

FREE DEMO VERSION GOT :

 

– Slim Version of the Chassis

– Metal Motor Mount Capability

– No Transmission Cover PLA7

– No Bumpers

– RIMS  2.2p 12mm

– Standard ESC Place Capability

– ALL PARTS TO RUN A GOOD DEMO VERSION 😉

– New REVERSE ACKERMANN STEERING SYSTEM

 

LIST OF COMPATIBILITY (and retro compatibility)

 

Transmission gear always from :

 

– Wltoys 144 or 124

– Official

– Mod 1mm

– Update Sleeper gear

 

CVD M3 diam 4mm and transmission gear and diff from :

WLTOYS

– 14401 14402 144010

– 124007 124016 124017 124018 124019

probably : 124008 (+124010) not tested but why not

– Bearing : MR84ZZ OR 684ZZ

 

CVD M4 diam 5mm :

WLTOYS

– 12428 12427 12423

– Bearing : 688ZZ AND MR115ZZ

 

CVD M4 5mm HSP 108015 (best choice) :

– Bearing : 6800ZZ AND MR115ZZ

 

There are two types of CVD, M3 4mm or M4 5mm.

 

if you choose CVD M3 4mm official or enhanced from WLtoys 144 or 124 then you will need to choose 4mm bearings, and so you have the choice between two types of bearings, either the small official 4x8x3 MR84ZZ ABEC7 OR the recommended 4x9x4 684ZZ ABEC7 for more performance.

 

if you choose CVD M4 5mm from WL toys 12428 12427 12423 then you will need 8x16x5 688ZZ ABEC7 AND 5x11x4 MR115ZZ ABEC7 bearings

 

if you choose CVD M4 5mm from HSP 108015 10x19x5 then you will need 6800ZZ ABEC7 AND 5x11x4 MR115ZZ ABEC7 bearings

 

Tips : CVD M4 5mm from HSP 108015  is the best choice, with no change from direction, transmission and diffs and diffs cups only change arms and the CVDs and hub cup carriers front/rear and the bearings and that’s all. You have the strongest CVD now.

 

NEEDS :

– TPU           ( 500g )

Arms

Bumpers

– PLA Plus      (  1Kg )

All the Rest

 

TOOLS :

 

– Hallen H2.5mm(for M3 Screws) / H1.5(for Pinion)

– Long Nose Pliers

– ThreadLocker

– Grease

– Clamp Gaskets

 

HARDWARE STORE :

 

BEARINGS For CVD M3 4mm official or enhanced from WLtoys 144 or 124:

4x8x3 MR84ZZ ABEC7    ( X 8)

OR

4x9x4 684ZZ ABEC7    ( X 8)

 

BEARINGS For CVD M4 5mm from WLtoys 12428 12427 12423 :

8x16x5 688ZZ ABEC7

AND

5x11x4 MR115ZZ ABEC7

 

BEARINGS For CVD M4 5mm from HSP 108015 :

10x19x5 6800ZZ ABEC7

AND

5x11x4 MR115ZZ ABEC7

 

Bearings

Washers M3           ( X 100)

Lock Nuts M3       ( X 100)

Screws :

– M3 x 14mm Hexa ( X 10) (STEERING)

– M3 x 20mm Hexa ( X 60) (ALL THE REST)

– M3 x 30mm Hexa ( X 10) (SHOCKS ABSORBERS / REVERSE ACKERMANN STEERING)

– M3 x 40mm Hexa ( X 20) (ARMS / REVERSE ACKERMANN STEERING)

– M4 x 40mm Hexa ( X 20) (ARMS IF KIT M4) (+Washers+Lock Nuts)

 

3D PRINT PARAMETERS :

 

– PRE ORIENTED MODELS

– PLA + : 40% Min – 95% MAX
– TPU : 40% Min – 95% MAX

 

TAGS :

 

– WLTOYS 144-124

– Ender 3 compatible

– PreOriented STL PARTS

– 3D Printed RC Car

– Reverse Ackermann Steering Compact System or direct drive steering

– Full Metal transmission

– Metal Steering Linkages Compatible

– Brushless Motor 2200KV MAX 3650 up to 4268  (3660 3150KV recommended)

– 3S -4S – 6S

– ESP Front Gyroscope

– Pinion and Gearing 1mm Module M1 (1mm Diametral Pitch) – No cogging issues

– Metal Differential mechanism Central axis Central drive shaft Motor-Gear

– Printed Beadlock Rims 2.2p or 3.2p

– Dogbones Hexa 12mmm

– Strong modulable design easy replace

– Standards parts

– 4 Arms = 1 Arm (Lowers and Uppers)

– 4WD -2WD -4×4 -2×4

– With or Without Anti roll Bar

– 1:12 Hardware

– No Glue Only M3 Screws Washers and LockNuts

– LED Light System Front and Rear

– Drift

– GoPro Mount

– Body Mount + upper protection

– Wheelie Bar

– Original dogbones and Wheel Nuts and upgrades

 

If you like it please buy it 😉

 

ENJOY

 

TAGS :

 

RC car, WLTOYS, 1:14, 4WD, Ender3, WLTOYS 144 124

RLAARLO, VRX, COBRA, SBK10, OMNI TERMINATOR,